main-bg main-bg bodybg header topbg
bodybg bullet-hover bullet-hover bullet-hover bullet-hover bullet-hover bullet-hover LOGO

*All images on this site are copywrite protected. Any copyright infringement or

unauthorized image use will result in prosecution.

Twitter square blue large Facebook square blue large Google + square red large bullet-hover
Basket white large

iPRODUCTS

FAQ'S

iPROOF main-bg

*All images on this site are copywrite protected. Any copyright infringement or

unauthorized image use will result in prosecution.

Our knowledgeable helpline staff are happy to give advice on your pond,

fish health or the use of our treatments,

7 DAYS A WEEK! 01934 633 000

iPaint  - High performance pond paint with advanced technology for better

results.

 

iProof  - Advanced waterproofing system for concrete pond construction.

 

iSeal - High performance ceramic crack filler for fine cracks.

 

iGlaze - Advanced neutralizing system for concrete ponds.

 

iFill - High performance epoxy gap filler for large cracks and holes.

 

iGrow - Advanced growing medium for all aquatics plants.

iPaint - Paint & sealer

 

Q: ipaint has has not stuck to my new concrete pond or is flaking off.

A: IMPORTANT - When using any new concrete DO NOT use silicone based concrete sealers, ONLY USE iProof. This has been specifically formulated to be used with water-based products.

 

When applying iPaint to old or existing concrete

surfaces it is vitally important to remove all traces of previous paints. Old oil based paints may not allow adhesion of the new acrylic iPaint.

 

Make sure all old concrete surfaces are thoroughly sanded to create an adequate key for the new iPaint.

 

 

 

  • iProof – Waterproofing powder

 

  • HOW TO USE: Mix chippings (10ml) 5 parts to 2 parts sand and 1 part cement. Add 4 spoonful’s (spoon enclosed) of iProof (approx.: 100g). Repeat for every mix.

  • Ponds should be constructed with this mixture and then given a final troweled screed as follows. For final screed mix 3 parts sand to 1 part cement to 8 spoonful’s of iProof.

 

  • IDEAL APPLICATION TEMPERATURE: Between 5C and 25C

 

  • WHAT IF IT RAINS? Once the concrete is set the pond is 100% waterproof. Rain may delay concrete setting co cover pond if this

        occurs.

 

 

  • iSeal – To repair fine cracks.

 

  • HOW TO USE: Make sure your concrete pond is clean, fairly dry and all cracked surfaces are rubbed down. Remove any flakey or loose material.

 

  • Mix a little water into the iSeal (Approx. 4 iSeal to 1 water) and stir into a paste using the small container supplied. After approximately 1 minute apply this paste into the cracks using the spatula provided. Try to leave a smooth repaired surface.

 

  • WHAT IF IT RAINS? Once the iSeal cement is cured (about 30 mins) and repaired surface is 100% waterproof.

 

 

  • iGlaze – Concrete pond neutralizer (lime neutralizer, when not using iPaint sealer)

 

  • HOW TO USE: Slowly dissolve iGlaze in hot water with constant stirring. Use 1 full measuring spoon (enclosed) per 2 ltrs of hot water. Thoroughly brush the solution over the entire concrete area. Repeat this process twice allowing 4 hours between coats and leave for 24 hours. Remove surplus iGlaze from the bottom of the pond and flush all surfaces with clean water. Fill pond with water, use Pond Doctor Dechlorinator.

 

  • IDEAL APPLICATION TEMPERATURE: Between 5C and 25C

 

  • WHAT IF IT RAINS? Once iGlaze has dried, approximately 1 hour. Rain will not affect the application.

 

 

  • iFill – To repair large cracks and holes.

 

  • HOW TO USE: Make sure your concrete pond dry, clean and all holes and cracks are rubbed down free of any flakey or loose material.

 

  • Cut a suitable piece depending on the crack/hole size of epoxy resin paste whilst wearing gloves. Vigorously kneed this piece until even in colour. This may take about one minute then push/squeeze

  • This mixed resin into the crack/hole. Try to leave a smooth repaired surface.

 

  • WHAT IF IT RAINS? Once the iFill paste is cured (about 60 mins) the repaired surface is 100% waterproof

Arrow black large PAINT-2.5L iSEAL iGLAZE iFILL